Speedy Surface Prep
12" x 12"
- Speedy removal of surface contaminants
- Easy to use with less effort
- Leaves surface smooth as glass
FINE Grade is for light to medium surface contaminants. Great for new or dark colored vehicles.
Speedy Surface Prep Towel works fast and achieves professional results with the advanced polymerized rubber technology, the next generation of surface preparation. Speedy Surface Prep Towel quickly, easily and safely removes paint over-spray, rail dust, brake dust, industrial pollution and other bonded surface contaminants from the surface of automotive paint, glass, moldings and plastic. Speedy Surface Prep Towel works great with your favorite showroom prep or clay lubricant product. The Speedy Surface Prep Towel is easily cleaned by simply rinsing off the accumulated contaminants with water. If you drop the Speedy Surface Prep Towel on the ground, no worries, just rinse the towel with water and you're ready to keep using it. Plus, the Speedy Surface Prep Towel does not require constant shaping and reshaping.
SPEED - Quickly removes contaminants from the surface.Just spray your favorite showroom prep or clay lubricant on the SPEEDY SURFACE PREP™ towel and the surface, glide the SPEEDY SURFACE PREP™ towel back and forth on the surface a few times then stop. Take a separate microfiber towel to wipe the residue from the surface - you are done.
LENGTH OF USE - You can SPEEDY SURFACE PREP™ 50 or more vehicles with one towel.
EASY TO MAINTAIN - If dropped on the ground, simply rinse clean and continue using. Rinse
SPEEDY SURFACE PREP™ between uses.
NO MORE SHAPING AND RE-SHAPING - Just fold and go
Instructions For Use:
Use only on clean, cool paint and out of direct sunlight.
Best operation temperature range is 50°F to 99°F.
Do not use on surfaces over 144°F otherwise the polymerized rubber surface will start to melt.
Avoid using soap and water as a lubricant.
Use only a showroom prep or clay lubricant to attain the best results.
Speedy Surface Prep Towel is not solvent resistant.
Thoroughly wash vehicle prior to application.
With your favorite showroom prep or clay lubricant, spray a generous amount onto the working surface and on the polymerized rubber surface of the Speedy Surface Prep Towel.
Using light pressure, gently slide Speedy Surface prep Towel from side to side. When the Speedy Surface Prep Towel glides freely, the bonded surface contaminants have been removed.
Wipe off the residual lubricant with a separate microfiber towel. Rub your hand across the surface; it should be as smooth as glass.
Continue these steps until you have completed the entire vehicle.
After each use, simply rinse the Speedy Surface Prep Towel in warm water and ring out...no soap required.